manualshive.com logo in svg

Olympus SP-560, Instruction Manual

Share
Download
Olympus SP-560 Instruction Manual Download Page 67

EN   

67

Gett

ing 
to

 kn
ow yo

ur ca

mera 

bet
te

r

• If you use a non-Olympus card or a card used for another application, such as for a 

computer, use [FORMAT] function to format the card.

g

“MEMORY FORMAT (FORMAT) Formatting the internal memory or card” (P.41)

This camera uses several lamps to indicate the camera status.

• Performing any of the following operations when not actually taking pictures can deplete 

the battery power.

• The shutter button is pressed halfway repeatedly in shooting mode, activating the auto 

focus and digital image stabilization.

• Using the zoom repeatedly.
• [FULLTIME AF] is set to [ON].
• The monitor is left on for an extended period of time.
• The camera is connected to a computer or printer.

• Some items may not be selectable from the menus when using the arrow pad. (The menu 

is grayed out and cannot be selected)

• Items that cannot be set with the current shooting mode
• Items that cannot be set because of an item that has already been set:

When [FOCUS MODE] is set to [MF], [AF MODE] cannot be selected.

• Items that cannot be set because the pictures taken by other camera will be edited.

• Some items cannot be set when the button is pressed.

[

%

] and [FLASH].

• Some functions cannot be used when there is no card in the camera.

PANORAMA/PRINT ORDER/FORMAT/BACKUP

Using a new card

Lamp indicators

Lamp

Status

Self-timer lamp

When set to [

Y

12 SEC]

The lamp lights for approximately 10 seconds, blinks for 
approximately 2 seconds, and then the picture is taken.

When set to [

Y

2 SEC]

The lamp blinks for approximately 2 seconds, and then the picture is 
taken.

When set to [SMILE SHOT]
Lit: Camera is ready
Blinking: The flash is charging (shooting not available)

Card access lamp

Blinking: An image or movie is being recorded or downloaded (when 
connected to a computer).
• Do not do any of the following while the card access lamp is 

blinking. Doing so may prevent the image data from being saved 
and render the internal memory or card unusable.

• Open the battery compartment cover/card cover.
• Removing the battery and card.
• Connect or disconnect the AC adapter.
• Disconnect the USB cable

Green lamp of the monitor Lit: The focus and exposure are locked.

Blinking: The focus is not locked.
• Release your finger from the shutter button, re-position the AF 

target mark on the subject and press the shutter button halfway 
again.

Extending the useful life of the battery

Functions that cannot be selected from menus/buttons

d4355_e_unified_forU-Print_00_bookfile.book  Page 67  Thursday, July 12, 2007  11:01 AM

Summary of Contents for SP-560






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands