Shooting
2
88
EN
Shooting without the vibration caused by shutter button operations
(Anti-Shock
r
)
Reduce the slight blur caused by shutter motion.
Use this option when even slight camera motion can cause blur, for example during
macro or telephoto photography.
• The delay between the shutter button being pressed all the way down and the start
of shooting can be selected using [Anti-Shock
r
/Silent
s
] > [Anti-Shock
r
] in
X
1
Press the
j
Y
(
G
) button.
2
Select one of the items marked ♦ using
HI
,
and then press the
Q
button.
3
Take pictures.
• When the set time has elapsed, the shutter is released and the picture is taken.
The Electronic Shutter
(Silent
s
)
Take pictures using the electronic shutter. Use for shutter speeds faster than 1/4000 s
or in settings where the sound of the shutter would be unwelcome. The electronic
shutter can be used in single-frame mode and custom self-timer modes and for
frame rates as high as about 15 fps in sequential shooting modes. This setting is only
available in
P
/
A
/
S
/
M
/
ART
modes.
•
The flash sync speed is 1/20 s.
• The delay between the shutter button being pressed all the way down and the shutter
being released can be selected using [Anti-Shock
r
/Silent
s
] > [Silent
s
] in
X
• In [Silent
s
] mode, [
8
], [AF Illuminator], and [Flash Mode] are set to [Not Allow] by
default. You can enable each operation in [Silent
s
Mode Settings].
1
Press the
j
Y
(
G
) button.
2
Highlight one of the options marked with ♥ using
HI
.
3
Press the
Q
button.
4
Take pictures.
• When the shutter is released, the monitor screen will go dark for a moment. No
shutter sound will be emitted.
•
The desired results may not be achieved under flickering light sources such as fluorescent
or LED lamps or if the subject moves abruptly during shooting.
• Note that due to the electronic shutter, the subject may appear to be distorted in
photographs if camera moves quickly during shooting or when shooting fast-moving
subjects.
