Olympus OmniScan MX2, User Manual

Page: 25 / 228

DMTA-20015-01EN [U8778402], Rev. J, January 2014
Important Information — Please Read Before Use 13
• Do not expose a battery to moisture or rain; doing so could cause an electric
shock.
• Only use the OmniScan MX or OmniScan MX2 unit or an external charger
approved by Olympus to charge the batteries.
• Only use batteries supplied by Olympus.
• Do not store batteries that have less than 40 % remaining charge. Recharge
batteries to between 40 % and 80 % capacity before storing them.
• During storage, keep the battery charge between 40 % and 80 %.
• Do not leave batteries in the OmniScan MX or OmniScan MX2 unit during
instrument storage.
Equipment Disposal
Before disposing of the OmniScan MX or OmniScan MX2, check your local laws,
rules, and regulations, and follow them accordingly.
CE (European Community)
WEEE Directive
This device complies with the requirements of both directive
2004/108/EC concerning electromagnetic compatibility and directive
2006/95/EC concerning low voltage. The CE marking indicates
compliance with the above directives.
In accordance with European Directive 2002/96/EC on Waste Electrical
and Electronic Equipment (WEEE), this symbol indicates that the
product must not be disposed of as unsorted municipal waste, but
should be collected separately. Refer to your local Olympus distributor
for return and/or collection systems available in your country.