Olympus OmniScan MX2, User Manual, Page: 120 / 228

DMTA-20015-01EN [U8778402], Rev. J, January 2014
Chapter 10 108
Possible solutions
• Only use a standard USB mouse.
• Only use a standard USB keyboard.
• Only use external storage devices that adhere to the USB Mass Storage
specification.
• If a printer is malfunctioning, make sure that it is compatible with the
OmniScan MX (for a list of compatible printers, contact your local Olympus
representative).
10.11 Boot Problems
10.11.1 A-Scan Display
The OmniScan software boots up, but no A-scan is displayed.
Possible cause
The BIOS version used is probably greater than 1.04B, but the fix for the old BIOS
command
BIOS 1.04 Rev B.cmd has been executed.
Solution 1
Correct the BIOS version as follows:
1. Insert a CompactFlash memory card (with valid OmniScan software on it) in a
memory card reader connected to a computer.
2. On the memory card, search for a directory named Run the Fix for old BIOS .
3. Run the Undo Fix.cmd program.
This removes incompatible files.
4. Insert the memory card into the OmniScan MX, and then start the OmniScan MX
using the usual start-up procedure.
Solution 2
Correct the BIOS version as follows:

Delete the contents of the memory card, and then, without running the BIOS 1.04
Rev B.cmd command, copy a clean version of the software onto it.