Olympus OM System OM-1 Instruction Manual Download

Page: 306 / 342

306

Information

Shooting tips and information

The camera does not turn on even when a battery is loaded

The battery is not fully charged

• Charge the battery with the USB-AC adapter.

The battery is temporarily unable to function because of the cold

• Battery performance drops at low temperatures. Remove the battery and warm it by

putting it in your pocket for a while.

A dialog prompting you to choose a language is displayed

The dialog is displayed in the following situations.

•

The camera is turned on for the first time.

• You have not chosen a language.

See “Initial setup” (P. 31) and choose a language.

No picture is taken when the shutter button is pressed

The camera has turned off automatically

• If [On] is selected for [Quick Sleep Mode] (P. 255), the camera will enter sleep mode if

no operations are performed for a set period. Press the shutter button halfway to exit the
sleep mode.

• The camera automatically enters sleep mode to reduce the drain on the battery if no

operations are performed for a set period of time.

[Sleep] (P. 254)

If no operations are performed for a set time after the camera has entered sleep mode,

the camera will turn off automatically.

[Auto Power Off] (P. 254)

The flash is charging

• On the monitor, the

mark blinks when charging is in progress. Wait for the blinking to

stop, then press the shutter button.

Unable to focus

• The camera cannot focus on subjects that are too close to the camera or that are not

suited to autofocus (the AF confirmation mark will blink in the monitor). Increase the

distance to the subject or focus on a high contrast object at the same distance from the
camera as your main subject, compose the shot, and shoot.

Subjects that are difficult to focus on

It may be difficult to focus with auto focus in the following situations.

AF confirmation

mark is blinking.
These subjects
are not focused.

Subject with low

contrast

Excessively bright

light in center of frame

Please select your language.

Por favor, selecciona tu idioma.

Veuillez choisir votre langue.

Bitte wählen Sie Ihre Sprache.

Summary of Contents for OM System OM-1























































































































































































































































































































































Search results

Summary of Contents for OM System OM-1

Reviews:

Related manuals for OM System OM-1

Brands by name

Popular brands

Olympus OM System OM-1, Instruction Manual

Search results

Summary of Contents for OM System OM-1

Reviews:

Related manuals for OM System OM-1

Brands by name

Popular brands