DMTA-10040-01EN, Rev. E, February 2018
Initial Setup
65
To change the location of saved files
1.
Press the ADV SETUP menu key (
) twice, and then press the B key to access
the
SYSTEM SETUP
screen (see Figure 3-1 on page 63).
2.
Repeatedly press the FULL NEXT key (
) until
FILE SAVE LOCATION
is
highlighted.
3.
Change the location as required; for example, select
EXTERNAL
if you want to
save files on the external microSD card.
The
BACKUP / RESTORE
function is disabled when files are saved on the external
microSD card.
3.4
Changing the Display Settings
You can change the appearance of some display elements such as brightness, auto
erase, VGA output, and whether or not the application window displays at startup.
To change the display settings
1.
Press the ADV SETUP menu key (
) twice.
2.
Press the B key to access the
SYSTEM SETUP
screen.
3.
In the
SYSTEMS SETUP
screen (see Figure 3-1 on page 63), use the FULL NEXT
key (
) to highlight the desired parameter and then use the knob to change its
value:
a)
Set
BRIGHTNESS
to one of the predefined brightness levels:
0 %
,
25 %
,
50 %
,
75 %
, or
100 %
(see “Changing the Display Brightness” on page 66 for
details).
b)
Set
VGA OUTPUT
to
ON
or
OFF
.
NOTE
Summary of Contents for nortec 600
