40
3
EN
Menu it
ems
Menu items
LCD/ Sound menu
Backlight
By default, the display will remain lit for about
10 seconds when a button on the recorder is
pressed.
1
Select [
Lighting time
], [
Dim light time
]
or [
Brightness
].
2
Select the options.
When [
Lighting time
] is selected:
[5 seconds] [10 seconds] [30 seconds]
[1 minute] [2 minutes] [5 minutes]:
Set the backlight duration.
When [
Dim light time
] is selected:
[30 seconds] [1 minute] [2 minutes]
[5 minutes] [Always On]:
Set the time after which the backlight dims.
When [
Brightness
] is selected:
[01] [02] [03]:
Sets the brightness of the backlight when lit.
LED
You can set it so the record indicator light does not
turn on.
[On]:
LED light will be set.
[Off]:
LED light will be canceled.
Beep
When the Beep is set to other than [Off], the
recorder will beep in case of error.
[Volume 3] [Volume 2] [Volume 1]:
Beep is enabled. The higher the number is, the
louder the volume.
[Off]:
Beep is disabled.
Language
You can set the language for the recorder’s user
interface.
[Čeština] [Dansk] [Deutsch] [English] [Español]
[Français] [Italiano] [Nederlands] [Polski]
[Русский] [Svenska]:
• The languages available may vary depending
on the country/region where the product is
purchased.
Device menu
Device Information
The currently set recording mode, microphone
sensitivity, and VCVA are indicated by icons, and
you can also check [Mic mode], [Internal memory],
[
SD card
] (when a SD card is inserted), [Model],
[Version], and [Serial No.].
Wi-Fi (DS-9500 only)
By using Wi-Fi, you can share dictation files with
transcriptionists at any time and from any location
without needing to return to the office.
For details, see “Share the dictation file via Wi-Fi
☞
P.32).
E-mail (DS-9500 only)
When you are traveling outside of your office, you
can connect to your smartphone via tethering and
send your dictation files as an attached file to your
email.
For details, see “Send dictation file” (
☞
P.33).
Memory select
When there is a SD card (sold separately) in the voice
recorder, you can select whether to record on the
internal memory or on the SD card.
• The recording media ([ ] or [
]) will appear
on the display.
