29
3
EN
De
vice lock func
tion
Access to the recorder can be restricted by using the
Device Lock function. Password authentication can
be safer for your data in case the recorder is lost.
The password can be set by using the ODMS
software (
☞
P.46).
When the password has been registered, you will be
asked for it on start-up.
1
Use the
+
,
–
,
9
or
0
buttons to select
a number.
2
Press the
OK/MENU
button to set a
number.
• A [
s
] will appear in the selected first digit
and the flashing cursor will move to the next
one over (to the right). Repeat steps 1 and 2
to enter all four digits.
• Pressing the
k
(erase) button at any time will
erase the last entry and move the cursor to
the previous entry (to the left).
Authentication halt mode
If the password does not match after five
consecutive tries, the recorder will enter into
authentication halt mode for ten minutes.
After ten minutes the password history will
be deleted, and the recorder will return to the
password input screen.
Device lock function
3
After all four digits have been entered,
press the
F2
(
ENTER
) button.
• If the 4 digit number entered matches the
registered password then the start-up
message will appear and the recorder will
start-up.
• The default password when using the ODMS
software to set the password for the first time
is “0000”.