Olympus D630 - CAMEDIA D 630 Zoom Digital Camera, Advanced Manual

Page: 68 / 134

68
6
S
e
ttin
g
s
Saving camera settings (ALL RESET)
This function lets you choose whether or not to save the current camera
settings after the power is turned off. The settings affected by [ALL
RESET] are listed below.
The [ALL RESET] setting ([ON]/[OFF]) applies to all modes. It applies
whether the camera is in shooting mode or playback mode.
ON All settings are returned to the factory default settings after the power is
turned off.
Example: If [ALL RESET] is set to [ON] and [
K ] is changed to [SQ1],
[ K ] returns to the factory default setting ([HQ]) when the
camera is turned on again.
OFF The settings made before the power is turned off are saved.
However, each setting such as record mode and flash setting will return to
the factory default setting with a shooting mode other than [PROGRAM
AUTO] or [MOVIE].
Top menu [MODE MENU] [SETUP] [ALL RESET]
g
“How to use the menus” (P. 15)
1
Select [OFF] or [ON], and press Z .
(
Functions that return to default settings when [ALL
RESET] is set [ON].
Note
• The settings in the [SETUP] tab in the [MODE MENU] ([ALL RESET], [ W ],
etc.) are saved even when [ALL RESET] is set to [ON].
Function Factory default setting Ref. page
F 0.0 P. 47
FLASH MODE AUTO P. 39
&
OFF P. 38
METERING 4 P. 49
ISO AUTO P. 50
f P P. 33
DIGITAL ZOOM OFF P. 37
K HQ P. 25
WB AUTO P. 48
INFO OFF P. 62