82
5
U
sef
ul fu
nct
ions
PIXEL MAPPING - Checking the image processing functions
The Pixel Mapping feature allows the camera to check and adjust the CCD
and image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait over a minute
after the monitor is used or continuous shots are taken to allow for proper
performance of the Pixel Mapping function.
1
In the shooting mode, select
[PIXEL MAPPING] from the menu,
and press
.
2
Press
to select [START], and
press .
• The
BUSY
bar is displayed during Pixel
Mapping. When Pixel Mapping is finished,
the screen returns to the menu.
• Press
to exit the menu.
• If you accidentally turn the camera off during Pixel Mapping, start again
from step 1.
Menu button (
)
OK button
Arrow pad
Note
