Olympus C-5000Zoom Page 71 Reference Manual Download

Page: 71 / 215

Ad
va

nce

sho

tin

Shutter priority shooting

Select

mode.

“A/S/M mode” (P.68)

Press

to set the shutter

speed.

: Sets a faster shutter speed.

: Sets a slower shutter speed.

If the shutter speed is displayed in red, the setting is unsuitable for the
conditions. Take the following steps (When the shutter speed is displayed in
green, the setting will provide optimum exposure).

Shutter speed range : 1 to 1/1000 sec.

• Shutter speeds that can be set differ according to the flash setting.

Mode dial

Shutter speed

appears:The image is overexposed.

Press

to set a faster shutter

speed.

appears:The image is

underexposed.
Press

to set a slower shutter

speed.

Note

Summary of Contents for C-5000Zoom
























































































































































































































Search results

Summary of Contents for C-5000Zoom

Reviews:

Related manuals for C-5000Zoom

Brands by name

Popular brands

Olympus C-5000Zoom, Reference Manual

Search results

Summary of Contents for C-5000Zoom

Reviews:

Related manuals for C-5000Zoom

Brands by name

Popular brands