manualshive.com logo in svg

Olympus 72DL PLUS, User Manual, Page: 12 / 60

Share
Download
Olympus 72DL PLUS User Manual Download Page 12

10-014357-01EN, Rev. 2, January 2022

Important Information — Please Read Before Use

6

Some of the details of components and/or software images in this manual may differ 
from your instrument’s components or software display. However, the principles 
remain the same.

Instrument Compatibility

The 72DL PLUS thickness gauge is primarily a self-contained unit. However, it does 
have a series of I/O ports that can be used to connect compatible peripherals and 
connect it to a PC. The gauge derives its required DC input power from the 
72DL PLUS AC charger/adapter or battery pack.

Always use equipment and accessories that meet Olympus specifications. Using 
incompatible equipment could cause equipment malfunction and/or damage, or 
human injury.

Repair and Modification

The 72DL PLUS gauge does not contain any user-serviceable parts. Opening the 
instrument might void the warranty. 

In order to prevent human injury and/or equipment damage, do not disassemble, 
modify, or attempt to repair the instrument.

IMPORTANT

CAUTION

CAUTION

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for 72DL PLUS





























































Reviews:

No comments