DMTA-10004-01EN, Rev. D, November 2016
Software Options
103
To use the multi-measurement with the soft contact mode
1.
Create and store custom setups for the sagittal height and lens thickness
measurements (see “Creating a Setup for Nonstandard Dual Element
Transducers” on page 212).
2.
Ensure that the multi-measurement software option is activated (see “Activating
Software Options” on page 92).
3.
Press
[SETUP MENU]
.
4.
In the menu, select
MULTI
.
5.
In the
MULTI
screen (see Figure 7-9 on page 104):
a)
Set
MULTI ENABLE
to
ON
.
b)
Set
MULTI MODE
to
SOFT CONTACT
.
c)
Set
DISPLAY MODE
to
WAVEFORM
or
LARGE FONT
d)
Set
SAVE/SEND KEY
to one of the following options to determine the
operation when you press
[SAVE/SEND]
:
○
ACTIVE
: Saves only the active measurement (the highlighted thickness)
to the datalogger.
○
AUTO
‑
INCR ACTIVE
: Saves the active measurement to the datalogger,
and then changes the active setup to the next setup in the
multi-measurement list. This option allows you to easily save all
multilayer measurement by repeatedly pressing
[SAVE/SEND]
.
e)
In
SGTTL HT
, select the custom setup for the sagittal height measurement.
f)
In
LENS THK
, select the custom setup for the lens thickness measurement.
g)
In
PDSTL DIA
, enter the diameter of the pedestal being used.
h)
Press
[MEAS]
to return to the measurement screen with the
multi-measurement function active in the soft contact mode.
Summary of Contents for 38DL PLUS
