DMTA-10009-01EN [U8778346], Rev. D, November 2016
Initial Setup
53
Figure 4
‑
4 Example of the indoor and the outdoor color schemes
The indoor scheme gives the best visibility when you use the instrument indoors or in
low lighting conditions. The indoor scheme presents green characters and waveform
trace on a black background.
The outdoor scheme gives best visibility when you use the instrument in direct
sunlight. The outdoor mode presents black characters and waveform trace on a white
background. For best readability, in this document, most screen captures are shown
with the outdoor color scheme.
Colored measurement values corresponding to specific alarm conditions only appear
when the indoor color scheme is selected.
4.4.2
Display Brightness
You can adjust the 38DL PLUS display brightness by selecting the backlight intensity.
The display brightness can be set at 0 %, 25 %, 50 %, 75 %, and 100 %. Choosing a high
percentage increases the brightness of the display. By default, the display brightness is
set to 25 %. From the measurement screen, press
[DISPLAY]
to access the
DISPLAY
BRIGHTNESS
parameter.
Outdoor color scheme
Indoor color scheme
NOTE
Summary of Contents for 38DL PLUS
