DMTA-10043-01EN, Rev. C, July 2016
Additional 27MG Gaging Features
49
3.
Use the
[
]
key to highlight
HOLD/BLANK
and
[
,
]
to select between
BLANK
and
HOLD
.
4.
Press
[MEAS]
to return to measurement mode.
7.6.5
Changing the Measure Rate Parameter
The Measure Rate parameter allows the user to display the measurement update rate.
The user can select between
NORMAL
(4 Hz) and
FAST
(20 Hz).
Changing to the fast update rate will greatly affect the battery life of the 27MG
Ultrasonic Thickness Gage.
To change the Measure Rate parameter
1.
Press
[2
nd
F]
[
] (SETUP)
to display the setup tabs.
2.
Use the
[
,
]
keys to highlight the
MEAS
tab.
3.
Use the
[
]
key to highlight
MEASURE RATE
and the
[
,
]
keys to select
between
NORMAL
(4 Hz) and
FAST
(20 Hz).
4.
Press
[MEAS]
to return to measurement mode.
7.6.6
Activating CAL LOCK
The
CAL LOCK
function allows the user to lock the calibration so that it cannot be
changed while
CAL LOCK
is enabled. If the user tries to change the calibration while
the lock is activated, the gage displays a
CAL LOCK
message.
To activate CAL LOCK
1.
Press
[2
nd
F]
[
] (SETUP)
to display the setup tabs.
2.
Use the
[
,
]
keys to highlight the
MEAS
tab.
3.
Use the
[
]
key to highlight
CAL LOCK
and
[
,
]
to select between
OFF
and
ON
.
4.
Press
[MEAS]
to return to measurement mode.
Summary of Contents for 27MG
