37
Voice Recognition Menu
Start Voice Recognition
This command is activated only when IBM's voice recognition application such as ViaVoice98,
ViaVoice Millennium, or later versions of these applications are installed. When this command is
active,
SpeakPad starts and the file selected in the Dictation ListView is automatically
converted to text
. This command is applicable only to DSS files that have been recorded in
Standard mode. This command is disabled when a DSS file that has been recorded in Long mode
is selected. It is also disabled while voice recognition is in progress.
If multiple DSS files are selected in the Dictation ListView, only those files that are recorded in
Standard mode are extracted, and voice recognition is performed on the files one by one. You can
monitor the progress of the voice recognition operation with the [Voice Recognition Progress ].
Range of Voice Recognition
This command is used to select the range of the file to be converted to text. Choose [Entire File] or
[Between Index Marks]. A check mark appears by the selected choice.
If you select the entire file, the voice data from the beginning to the end of the file is converted to
text. If you select Between Index Marks, the voice data between the first and second index marks is
converted to text. If only one index mark exists, the data between this index mark to the end of the
file is converted to text. If there are no index marks, the entire file is converted to text.
Automatic Playback
If this item is checked, the screen switches to the Playback Control Window immediately after
starting the voice recognition operation. If you exit the Playback Control Window, playback
continues on the Dictation Window.
In this case, if the range to perform voice recognition is between index marks, playback starts from
the first index mark position.
Display Voice Recognition Progress
A dialog box appears and the voice recognition progress for each file is shown.
The file that is file which is being transcribed by voice recognition is indicated as
[Recognition
Processing].
Those files that are standing by are indicated as
[Waiting]
.
The current voice recognition transcription can be canceled by pushing the [end of voice
recognition] button.
You can remove the files that are waiting on the list with the
[Cancel]
button.
