Olympia Omega 1630f, User Manual

Page: 39 / 53

Connecting the Computer and Copier 7
7-9
Setting Up the IPP Print Connection
Set up the IPP Print connection. In order to set up IPP printing, you must
start by installing the printer driver. (For details on installing the printer
driver, refer to “PCL PRINTER CONTROLLER” or “GDI PRINTER
CONTROLLER” in the manual provided with the copier.)
1
When using Windows 2000, click [Start] - [Settings] - [Printers] to open
the “Printers” folder.
When using Windows XP, click [Start] - [Control Panel] - [Printers and
Other Hardware] - [See a list of installed printers and fax printers.] to
open the “Printers and Faxes” folder.
2
Start up the Add Printer Wizard, and then click [Next>].
3
Select Network Printer , and then click [Next>].
4
Select Connect to a printer on the internet or on your intranet .
5
Enter “http://copier IP address/ipp.cgi” in the URL box.
H (Example) If the copier IP address is 192.168.0.10, enter:
http://192.168.0.10/ipp.cgi
6
Click [Next>]. When a confirmation message appears, click [OK].
7
Follow the instructions that appear on the screen to complete the
installation.