Master Slave socket outlet
MS 1700
Manual
Important safety rules
Please read the instructions thoroughly before using the device to make sure that you are able to use all of its functions.
Keep children and pets away from the device. The device may only be used by adults.
Have any necessary repairs performed by qualified specialist personnel.
Protect the device against direct sunshine, extreme heat and moisture.
Safety note:
The power socket must be located close to the equipment and be easily accessible. This enables the equipment to be disconnected from the power supply quickly
in an emergency.
Electrical safety guidelines:
- Pull out the mains plug if the device is not going to be used for a long time.
- If the mains cable, mains plug or the device itself is damaged do not operate the device any longer (danger of injuries).
- Do not overload the recommended capacity of the mains socket.
- Do not make any alterations to the mains cable as it has been designed for the specified mains voltage.
Intended use
The master-slave-power plug is designed to be used for power supply of household products.
The device may only be used indoors in dry rooms.
Adjustment of the switching level
- Please connect the power plug to the power wall socket for 230 Volt. Connect the main device (which shall switch on the power sockets for the other devices)
to the master socket. Turn the adjustment knob anti-clockwise to the stop (insensible).
- Turn the main power switch of the master-slave socket on. The red lamp inside the switch is shining. Switch off the main device or go to stand-by mode. Now
the lamp for slave must be turned out.
- Switch on the master device while the lamp for slave must still be switched off. Turn the adjustment knob with a srew driver slowly clockwise till the slave lamp
is turned on. In this situation the devices connected to the slave sockets get power.
- Please check the right adjustment and by switching off the main device ( or go to stand-by mode). The lamp for slave shall be turned out again. In case that this
doesn’t happen, please repeat the adjustment procedure.
Disposal Notes
This symbol [the crossed-out wheeled bin/PICTURE] means that the product should be brought to the return and or separate collection systems available to end-
users, when the product has reached the end of its lifetime. This symbol applies only to the countries within the EEA. EEA = European Economic Area, which
comprises the EU Member States plus Norway, Iceland, and Liechtenstein.
Guarantee ATTENTION! IMPORTANT GUARANTEE DOCUMENTS! PLEASE STORE IN A SAFE PLACE.
Dear Customer,
Thank you for buying a quality product from . In the unlikely event that the device should develop a technical problem please observe the following points:
- The guarantee period for the device is 24 months.
- Make sure that you store the purchasing receipt and the original packaging.
- Should a problem occur, please call our hotline first:
+ 49 (0) 180/500 7514
(Fee for connections outside Germany: additional Euro 0.14 per call for the connection
within Germany.) Our personnel are often able to provide helpful advice over the phone. If it is not possible to clear up the problem over the phone, please send
the device back to the following address:
Service-Center Hattingen
Weg zum Wasserwerk 10
45525 Hattingen, Germany
Guarantee repairs will only be performed if the purchase receipt is enclosed with the device. Thank you for your understanding.
Yours faithfully,
Your Olympia Business Systems partner
