14
Operation
36
Searching for a message
The device plays the first five seconds of each recording.
Press the FILE/TIME button when
Standby mode is active to select a
file (A, B, C, D). Press and hold the
PLAY/STOP button
for 2 sec-
onds. SCAN appears in the dis-
play. The device plays the first 5
seconds of each message located
in the file selected (A, B, C, D).
The device ends the search auto-
matically if no message is se-
lected. To play a message during
the search, press the PLAY/STOP
button
. To end the search,
press the PLAY/STOP button
twice.
Erasing messages
Activate Standby mode and select
the file required by pressing the
FILE/TIME button
and the re-
quired message by pressing the
REV
or FWD
button. The
message number and length ap-
pear in the display.
