12
1
ON VOX OFF
ON VOX OFF
HIGH MIC LOW
HIGH MIC LOW
2
DEL/REPEAT
DEL/REPEAT
FI LE/TIME
FI LE/TIME
HOLD
HOLD
1
Operation
31
Recording
The device is equipped with an automatic voice activity detector (VOX) (refer
to Page 32 Voice activity detector (VOX)"). If VOX is deactivated, you can re-
cord in the normal way.
Ensure that the VOX control on the
rear side is set to OFF. Switch the
device on and select the required
recording quality (refer to Page 29
Recording quality").
Select a file/memory location by
pressing the FILE/TIME button
(refer to Page 30 Managing mess-
ages").
Press the REC/STOP button
when the device is in Standby
mode, REC lights up in the display
and the recording time appears.
Speak into the microphone or con-
nect a microphone to the MIC jack
and speak at a normal volume. Press the REC/STOP button
again to end
recording.
Press the PLAY/STOP button
to
display the time remaining for re-
cording. Press the MODE/PAUSE
button
to interrupt recording,
PAUSE flashes in the display. To re-
sume recording, press the MODE/
PAUSE button
again.