MAINTENANCE AND CARE INSTRUCTIONS
Olympia products are designed and engineered under strict quality standards. Regular and
proper care of our products will ensure years of trouble free service. To clean, simply wipe
with a damp, soft cloth. Do not use abrasive or harsh cleaners as they may result in finish
damage. Regularly remove and clean minor debris from the aerator.
TROUBLE SHOOTING
If faucet has low flow:
A.
Ensure water supplies are fully open.
1.
Remove aerator, clean all internal debris and tighten the
2.
aerator back.
If low flow continues, remove and clean cartridge (C) by
3.
following procedures above.
If water leaks under the faucet:
B.
Check SST flex hose and center outlet line connections and
1.
supply line hookups to ensure they are tightly fastened.
If water leaks below the handle:
C.
Ensure assembly of cartridge (C), retaining nut (D) and cap
1.
(E) are securely tighten. Replace cartridge (C) if necessary.
INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR OLYMPIA SINGLE
HANDLE KITCHEN PULL-DOWN FAUCET
THIS PRODUCT MEETS THE FOLLOWING STANDARDS: ASME A112.18.1 ~ ANSI
A117.1 ~ ANSI / NSF 61, SECTION 9 ~ UPC / IAPMO LISTED / ADA COMPLIANT ~
COMPLIES WITH CALIFORNIA LEAD PLUMBING LAW
PRODUCT NUMBERS
#K-5040
Lever Handle ~ Pull-down Spray
ADA
Olympia Faucets, Inc. © 2012
TO SET OR ADJUST TEMPERATURE LIMIT STOP
Caution
: Valve is preset at the factory at maximum setting. Adjust as necessary. Please see instructions below:
Turn off water at the source and relieve pressure.
1.
Remove handle (F) by removing hot/cold button and loosening handle set screw, lift up.
2.
Unscrew cap (E) and retaining nut (D) by turning counter clockwise.
3.
Raise the red adjustment ring on the ceramic disc cartridge.
4.
Turn adjustment ring counter clockwise to decrease temperature setting then replace the adjustment ring
5.
on the ceramic disc cartridge.
Reassemble and test until desired temperature is reached. (Note: Ensure a proper alignment of cartridge
6.
with notch in valve body.)
OLYMPIA FAUCETS, INC. LIMITED LIFETIME WARRANTY *
Olympia Faucets, Inc. warrants its products to the original consumer purchaser to be free from defects in material
and workmanship as long as the consumer purchaser owns it. Dated proof of purchase must accompany all war-
ranty claims. PVD finishes carry a lifetime warranty in residential service.
Olympia Faucets, Inc. will replace, free of charge, to the original consumer purchaser, any and all parts that
prove defective under normal installation, use, and service. Damage as a result of misuse, abuse, accident, or
improper installation, will consequentially void this warranty. Replacement parts can be obtained from your local
dealer or directly from Olympia Faucets. Olympia Faucets, Inc. recommends using a certified plumber for all
faucet installation and repair.
This warranty is limited to replacement of defective parts only. Incidental and consequential damages, labor
charges, repair, or replacement costs are expressly excluded. Some states do not allow the exclusion or limita
-
tion of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives
you specific legal rights, as you may have other rights of which vary from state to state.
Installation or maintenance and cleaning must be in compliance with instructions furnished with every Olympia
product. If you find a problem with your product, please immediately contact your nearest Olympia Faucets, Inc.
dealer or sales representative.
* 2 year limited warranty on commercial and multi-family projects.
