![background image](http://html2.mh-extra.com/html/olympia/g4410/g4410_operating-manual_3868386014.webp)
14
2SHUDWLRQ
1.
Place the guillotine on a stable, level base with the guillotine side fac-
ing up.
2.
The guillotine arm is locked on the cutting unit.
Proceed as follows to unlock the guillotine arm:
Press the arm lock downwards (Fig. 1/1).
At the same time, pull the guillotine arm
towards you using the handle (Fig. 1/2).
Move the guillotine arm upwards
(Fig. 1/3).
3.
Adjust the aligning rail to the position you re-
quire (Fig. 2):
Release the aligning rail's locking mecha-
nism by turning it to OPEN.
Slide the aligning rail to the position neces-
sary.
Turn the locking mechanism back to
CLOSE. There are two positions provided:
turn to the right or to the left.
4.
Proceed as follows to make a cut:
Move the guillotine arm upwards.
Slide the material to be cut under the press-
ing rail and align it to the aligning marks on
the base. Slide it against the aligning rail, if
necessary.
Press down with one hand on the pressing
rail to clamp the material to be cut
(Fig. 3/1).
Use the other hand to move the guillotine
arm down and cut the material (Fig. 3/2).
)LJ
)LJ
)LJ