ENERGY CONSUMPTION AND COST
Total Time Consumed Display
This mode displays the total on time of the accumulated energy used
by the appliance plugged into unit;
The total time that the meter is turned on, in Hour/Minute/Second or Hour/Minute
format from the start of measurement. When the time reaches 99:59:59, the
format will switch to Hour/Minute. Maximum is 9999.59. Resolution is 1 second
for total time less than 100 hours.
Otherwise the resolution is 1 minute. Both power meter and the appliance
itself has to be turned on for time to be counted. If the appliance draws
too little current (0.00A displayed in Ampere Mode), the time will not be
counted. Press
Price
key will go to Total cost mode.
Price / KWh mode - Two Price Mode
In this mode the electricity price per KWh and the corresponding
time are displayed. The Energy Meter permits two electricity prices
to be set
- Regular Price (denote by word RP) and Discount Price
(denote by word DP).
If the connected appliance is switched on
within the period of Regular Price (RP), the costs of electricity
consumed will be calculated at Regular Price. The Discount Price
will apply to the other period when the meter is in use.
The price input here affects the >>cost of electricity consumed<< display.
Input the electricity price as follows:
Setting steps:
Press
PRICE
key in normal clock mode to display bottom pane.
Press
OVERLOAD
key to enter into Regular Price setting mode.
The word RP will display on top left pane. The first digit of price
at bottom pane will flash.
Use
UP
or
DOWN
key to set the 1st digit of the price.
Press
OVERLOAD
key to confirm, then the 2nd digit will flash.
Use
UP
or
DOWN
key to set the 2nd digit of the price.
Press
OVERLOAD
key to confirm, then the 3rd digit will flash.
Repeat step 3 and 4 to set the 4th, 5th, 6th and 7th digit of the price.
2
2
3
4
5
6
7
P M
PRICE KWh
4
5
7
6
6
7
P M
2
PRICE KWh
P M
PRICE KWh
Discount Price
Regular Price