Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia 2012
Page 108
All Rights Reserved!
6.30
Programming order messages
Note:
Order messages / order groups are only available when the cash register is operated in its gastronomy version
(see Chapter 6.35).
Order groups ensure that PLUs with the same order number are printed on the same order message (also see
Chapter 6.6.1.10). This means that all orders from guests can be printed properly sorted and are transferred to the
relevant section within the gastronomy service (bar, kitchen, ice-cream parlour, cocktail bar, etc.). This ensures that no
order is forgotten.
The order messages with different order numbers are printed in succession. Order messages indicate the sections and
appear at the top of the order messages.
Up to 9 order messages can be programmed, each with a maximum of 24 characters.
Example:
The order message "Food" should be programmed for memory location 5.
1.
Set the key to PRG.
2.
Select
programming number 41
(see Chapter 6.1.2).
3.
Press the
┣CASH┫
key to confirm
the input.
Input
Display
ORDER MESSAGE 00-0 1 1
[
] name
4.
Use the
┣CASH┫
key to switch to
the required memory location.
4x
ORDER MESSAGE 00-0 5 1
[
] name
5.
Use the
┣↑┫
and
┣↓┫
keys to
move to the
[ ] name
input area.
[
] name
6.
Press the
┣CASH┫
key to confirm
the input.
7.
Enter the required order mes-
sage name (max. 18 characters)
(see Chapter 6.2).
Procedure
see Chapter 6.2
Food
8.
Press the
┣CASH┫
key to confirm
the input.
[Food
] name
9.
Conclude programming by press-
ing the
┣SUB-TOTAL┫
key.
