Page
63
OLYMPIA CM 1856F _______________________Programming Instruction___________________________________
13. SERVICE-PROGRAMM im „S“ MODE
START Program with
: 1. Plug out the Mains plug
2. Set the key position on the cash register to “S“
3. Plug in the Mains plug
4. Scroll with the Keys
[
3DJH8S
]
and
[
5(&(,37212))
]
Back with
[
=:
]
Key
.
Screen display in service mode: LOAD FLASH MEMORY
FACTORY TEST
EXIBITION
1. LOAD FLASH MEMORY : Starts the menu for transferring the PC software
2. FACTORY TEST : Starts the menu test programme
3. EXIBITION :
Starts a display test, to end this pull the mains cable.
With the keys
[
3$*(83
]
and
[
5(&(,372Q2))
]
go to
LOAD FLASH MEMORY
and confirm with the
[
&$6+
]
Key.
Display :
HISTORY
OPEN PORTS FOR PC
RUN FLASH PROGRAM
1. HISTORY : All system data of the cash register is shown
2. OPEN PORTS FOR PC : In this menu, new software programme updates can be send to the cash register.
3. RUN FLASH PROGRAM : Starts a test and jumps to the programming S-MODE.
With the Keys
[
3$*(83
]
and
[
5(&(,372Q2))
]
go to
FACTORY TEST
and confirm with the
[
&$6+
]
Key.
Display Anzeige: ALL TEST ( with printing ) SELF-TEST-function
SELECTED ( without printing ) SELF-TEST-function
With the Keys
[
3$*(83
]
and
[
5(&(,372Q2))
]
go to
EXIBITION
and confirm with the
[
&$6+
]
Key.
Display : A display test with demo programme runs automatically. Only end this by pulling the mains cable.
To end the S-Mode: Pull the mains cable, set the
cash register to OFF or REG and plug the mains cable back in
.