BS-506/WL
WIRELESS INTERCONNECT
BATTERY OPERATED
SMOKE ALARM
IP
20
10
years
Optical
85dB@3m
EN14604
200
8
EN
300220-2
Battery
Life
BS-506/WL
10
years
Replaceable batteries: 2x AA Lithium FR6 (L91)
0.110 dB/m
Optical and Acoustic > 85dB (A) at 3 m
Yes
Yes
Yes
Ceiling
Wireless
Optical
IP20
EN14604-200
8
, EN300220-2
o
0 to 4
5
C
Up to 93%
ABS/PC, PC
Ø1
mm
30 x 43
.
185gr.
POWER SUPPLY
BATTERY LIFE
SMOKE CONCENTRATION SENSITIVITY
INDICATORS
ALARM SILENCE FACILITY
LOW BATTERY WARNING
LOW BATTERY SILENCE FACILITY
MOUNTING LOCATION
INTERCONNECTABLE
INTERACTION POSSIBILITY
OPERATIONAL FREQUENCY RANGE
TRANSMIT POWER
TRANSMISSION RANGE
>100m in open area (LoS)
< 13,5 dBm
Up to 40 Smoke alarms
868-870 MHz
DETECTION METHOD
DEGREES OF COVER PROTECTION
PRODUCED IN ACCORDANCE WITH
OPERATION TEMPERATURE RANGE
RELATIVE HUMIDITY
CONSTRUCTION MATERIAL
EXTERNAL DIMENSION
WEIGHT
GUARANTEE
Technical Characteristics
3 years (1 year for the batteries)
BS-506/WL
Wireless Interconnect
Battery Operated Smoke Alarm
EN
14604:2008
, EN 300220-2
DoP: 921506002_59_001
False alarm is often caused by dust or steam.
After the batteries replacement, the device performs an auto-adjusting process in 8 hours period to establish its
operation. If false alarm happens within this period, it is important to clean the smoke alarm as described in
maintenance paragraph.
If a smoke alarm does not perform the "Remote Device Test", perform a "Factory Reset" and reinstall it on the
network. If it is far from neighboring smoke alarms, you may need to install an additional smoke alarm in
between.
If a smoke alarm receives a low signal level, place it closer to its nearest smoke alarm or install a new smoke
alarm in between.
Recycling and Desposal
Troubleshooting
The WEEE symbol means that this product and batteries must be disposed separately from other household
waste. When they reach their end of life, take them to a designated waste collection point in your area to
guarantee a safe disposal or recycling. Protect the environment, human health and natural resources!
Indications Overview
Overview of Test Key Combinations
Battery and Wireless Signal Strength Tests
1 Red
Per Minute
1
-
-
-
-
-
-
1
1
1
Only on alarm mode
Only on alarm mode
1
1
1
1
2
2
1
1
2
2
3
3
1
3
None
The device operates
normally
1 Red
Per Second
Alarm Pattern
Device Under Testing
1 Red
Per Second
Alarm Pattern
Smoke Detection
1 Red
Per 10 Seconds
None
9 minutes
reduced sensitivity
3 Yellow
Per 43 Seconds
None
Exit from
alarm function
None
Replace the
batteries
None
3 short sounds
every minute
Replace the
smoke alarm
1 short sound
every minute
ALARM
HUSH SMOKE ALARM
(LOCAL)
FUNCTION CHECK
TEST OF ALL SMOKE ALARMS
(REMOTE)
HUSH
HUSH OF ALL SMOKE ALARMS
(REMOTE)
ALARM
MEMORY
BATTERY STATUTS
CHECK
LOW
BATTERY
SIGNAL STRENGTH
TEST
FAULT
WARNING
NETWORK INSTALLATION
(
CENTRAL)
NETWORK INSTALLATION
(
PERIPHERAL)
NORMAL OPERATION
TEST SMOKE ALARM
(LOCAL)
Visual Indication
(flashing)
Short
Press
Modes
Operations
Flashing Number
Audio Signal
Long
Press
Battery Level
Comments
Sum of
Pressings
Comments
Signal Strength
4
5
9215060
02
_0
9
_00
3
9215060
02
_0
9
_00
3
1. Remove the smoke alarm the from mounting plate following Step 1 of the installation instructions.
2. Clean the device as described in maintenance paragraph.
4. Place the smoke alarm on the mounting plate and secure it by turning it clockwise.
3. Replace the old batteries by a new pair. Use recommended batteries for more reliable operation.
5. Test the correct operation of your smoke alarm as described in Device Test paragraph. If no sound is
generated, the smoke alarm must be replaced immediately!
Battery Replacement
1
2
3
4
5
Very Low
Very Weak
Low
Weak
Medium
Medium
High
Strong
Very High
Very Strong
European
manufacturers
Thank you for your trust in our products
Olympia Electronics - European manufacturer
Olympia Electronics reserves the right to repair or to replace the returned goods
and to or not
charge the buyer depending on the reason of defection. Olympia
Electronics reserves the right to charge or not the buyer the transportation cost.
Olympia Electronics guarantees the quality, condition and operation of the goods.
The period of warranty is specified in the official catalogue of Olympia Electronics
and also in the technical leaflet, which accompanies each product. This warranty
ceases to exist if the buyer does not follow the technical instructions included in
official documents given by Olympia Electronics or if the buyer modifies the goods
provided or has any repairs or re-setting done by a third party, unless Olympia
Electronics has fully agreed to them in writing.
Products that have been damaged
can be returned to the premises of our company for repair or replacement, as long
as the warranty period is valid.
Warranty
72
nd
km
.
O
.
N
.
R
.
Thessaloniki-Katerini
P.C. 60300 P.O. Box 06 Εginio Pierias Greece
www.olympia-electronics.com
EGINIO
PIERIAS
60
300
GREECE
