XZAC4219-03 Service
Manual
4-11
LINE LENGTH: 90 - 94
Selection of the maximum width of the print line,
expressed in number of characters at 10 cpi.
PRINTER REPLY SYNCRONIZED: N – Y
Management of the DSR in transmission.
STATUS REQUEST: NO WAIT – WAIT
This parameter determines the timing of the status
reply to an ESC j command. Selecting NO WAIT, the
reply will be provided as soon as possible and in
parallel with printing or paper movements. Selecting
WAIT, the status reply will be provided at the end of
printing.
(if the “horizontal magnetic option is present)
OPTION HORIZONTAL MSRW
Message indicating that the option has been installed.
There is no selection and the next selection is printed
after this title. If the hor. magn. / MICR option is
present, “+ MICR” is shown beside “MSRW”.
STANDARD: DIN/ISO - ANSI - IBM 3604
Sets the magnetic standard.
(if) IBM 3604
END-SENTINEL: C - F
Sets the closing code.
DISPLACEMENT: ST10 +20
Sets the position of the magnetic stripe.
DUPLICATE: N - Y
Sets or not duplication of the field.
DOUBLE FIELD CHECK: N - Y
Sets or not control on the two fields recorded.
RETRY: 3 - 1
Sets read retries.
STRIPE HANDLING: NORMAL – FAST
Permits fast or normal management of the magnetic
stripe. In the case of normal management, each time
the magnetic stripe is read or written, passbook width
is measured in order to establish the precise position
of the stripe.
In fast management, the width of the passbook is
measured once only with the procedure described in
the specific chapter and no measurements are made
during reading or writing of the stripe, thus increasing
speed of management of the stripe.