XZAC4219-03 Service
Manual
3-17
If scraps of paper remain jammed in inaccessible internal parts, these can be removed as follows:
1. Open the cover and switch on the printer with STATION 1/EJECT pressed.
2. Wait for the acoustic signal.
3. Pressing STATION 1/EJECT and/or STATION 2/EJECT, the paper will be moved forward and back so that
it is possible to remove the scraps of paper that have jammed.
4. Switch off the machine and close the cover before switching the printer on.
3.7.6.3
PAPER JAM IN THE AREA OF THE REAR SLOT
To remove a document in the area close to the rear slot, this can be recovered without opening the machine
as above, but pulling it carefully towards the outside in order to avoid damage.
Figure 3 -
PR2
plus – Removal of the document in the area of the rear slot