XZAC4219-03 Service
Manual
3-15
3.7.5.2
REPLACEMENT OF THE RIBBON CARTRIDGE WITH MACHINE ON
The ribbon cartridge may be replaced with the machine on, as explained below:
•
Open the cover of the printer; printing is blocked automatically.
•
Using the specific lever, lift the internal upper unit of the machine.
•
Remove the old cartridge and replace it with the new cartridge as described above.
•
Using the specific lever, lower the internal upper unit.
•
Close the cover of the printer.
Note:
DO NOT move the printhead manually.
3.7.6
PAPER JAM
The paper may jam along the path inside the machine.
Jamming may be caused by:
•
Paper path obstructed (scraps of paper, for example)
•
Paper fed crosswise
•
Weight or format outside permitted limits
•
Paper in bad conditions: creased, misshapen or in poor condition
•
Paper with metal staples or paper clips (this condition may seriously damage the machine)
•
Multicopy forms with incorrectly glued sheets.
Possible areas of jamming:
•
initial feed area from front feeder
•
internal area of the printer
•
rear area towards the documents outfeed.