9-28
XZAC4219-03
9.2.16
DISASSEMBLY/REASSEMBLY OF THE PLATEN (MACHINES WITH SERIAL NUMBER
1.XXX.XXX)
•
Remove the casing as explained above.
•
From the front, lift the entire mechanism from the baseplate and rotate it partially so as to access the
connectors of the motherboard.
•
Disconnect all the cables except for those of the printhead.
•
Back off the four lock-nuts (1) of the platen and slide it out from above.
Note:
Particular attention must be paid to correct assembly/disassembly of the four springs applied
to the four screws (the two central springs are shorter than the other two side springs).
Figure 9-32
Note:
After reassembly, adjust printhead/platen distance (par.
8.4
).
1