XZAC4219-03 Service
Manual
9-27
9.2.15
DISASSEMBLY/REASSEMBLY OF THE PLATEN (MACHINES WITH SERIAL NUMBER 8.xxx.xxx)
•
Remove the casing as explained above.
•
From the front, lift the entire mechanism from the baseplate and rotate it partially so as to access the
connectors of the motherboard.
•
Disconnect all the cables except for those of the printhead.
•
Back off the two lock-nuts (1) of the platen and slide it out from above.
Figure 9-31
Note:
After reassembly, adjust printhead/platen distance (par.
8.3
).
1