9-26
XZAC4219-03
Figure 9-30 Machines with serial number 1.XXX.XXX
Note:
When reassembling the conveyor, make sure that the coupling has been fitted before refitting the
pressure roller assy.
During reassembly, do not fasten the photosensor support until the conveyor has been fastened, as
the conveyor has two reference pins for the photosensor support.
During reassembly, adjust the front pressure rollers (par.
8.9
), opening of the strip (par.
8.10
) and calibration of
the photosensors (par.
4.3.1
).
10
9
9