XZAC4219-03 Service
Manual
8-13
8.12
ADJUSTMENT OF HORIZONTAL MAGNETIC/MICR CLOSING FLAP
MACHINE STATUS:
Read/write carriage in reset position (end of stroke motor side) and screw (1) which joins the semi tie-rods
loosened.
CONDITIONS TO BE CHECKED:
Co-planarity between the closing flap and the front surface of the structure.
PROCEDURE:
Position the flap (2) in contact with the slot (3) operating in the compartment between the fork and toothing of
the semi tie-rods (4); then, tighten the screw (1).
Figure 8-12
1
4
3
2
AREA FOR
ADJUSTMENT
OF