10-5
Internet Faxing (i-FAX) > i-FAX Settings
i-FAX Settings
To send and receive Internet faxes, you must first specify the SMTP server and POP3 server settings.
Specify these settings using
Embedded Web Server RX
on a computer that is connected to this machine via a
network.
Refer to the machine’s
Operation Guide
for information on the network settings.
Accessing
Embedded Web Server RX
1
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Examples: 10.180.81.3/ (for IP address)
MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and
Embedded Web Server RX
as well as their current status.
3
Enter the user name and password of the administrator, and click Login.
Setting Administrator User Name, and Password restricts general users' access to pages
other than the Start page. For security purposes, setting the Administrator password is
highly recommended. The default Administrator password is factory-set as ‘Admin’.
4
Click ‘Function Settings’ from the navigation bar on the left to view and set values for that
particular category.
5
Click ‘FAX / i-FAX’.
The Transmit Settings dialog box will appear.
NOTE
If the screen "There is a problem with this website's security certificate." is displayed,
configure the certificate.
Embedded Web Server RX
User Guide
You can also continue the operation without configuring the certificate.
Embedded Web Server RX
User Guide
