Olivetti PR2 PLUS, Service Manual, Page: 89 / 172

XZAC4219-05 Service Manual
5-5
O - X - -
Photosensor test
failed
See the section “CALIBRATING
THE PHOTOSENSORS” on page 4
- 18
for an indication of the defective
photosensor.
O - X - X Magnetic reset
Replace the horizontal magnetic or
MICR interface card. See the
section
“Horizontal magnetic/MICR
disassembly/reassembly” on page 7
- 28.
O - X X -
AFE scanner
error
• Perform calibration of the
scanner. See the section
“Calibrating the scanner” on
page 4 - 28.
• Replace the CIS. See the
sections:
“CIS assy (upper
scanner) disassembly/
reassembly” on page 7 - 33
and
“CIS assy (lower scanner)
disassembly/reassembly” on
page 7 - 34.
O O X X X
Memory
Maintenance -
On the display (if
present) appears
the message
«
WARNING
Maintenance
data
».
Impossible to
recover valid
maintenance
data from the
dedicated Flash
EPROM area.
The maintenance
data will be
reinitialised with
the value «0».
• Press any key on the console to
display the next anomaly, when
necessary.
• Proceed with initialisation of the
printer.
O X - - - Service motor
See the section “Faults with
document handling” on page 5 - 19.
O X - - X
Paper jammed
on insertion
photosensors
or photosensors
dirty
See the section “PROCEDURE
FOR CLEANING / REPLACING
THE PHOTOSENSORS” on page 6
- 2.
Console LED Anomalies Possible solution
ON Ready Station1 Local Station 2