Olivetti PR2 PLUS, Service Manual, Page: 169 / 172

XZA4219-05 Service Manual
A-7
8.
Select the file containing the firmware to be transferred, confirming this with the Open key.
Figure A - 4 Display for selecting f
ile containing the firmware to be transferred
9.
Select the Send key and wait until transfer of the firmware has been completed.
Figure A - 5 Key to send the firmware transfer
10.
Calibrate the photosensors. See the section “CALIBRATING THE PHOTOSENSORS” on page 4 - 18 .
Calibrate the scanner. See the section “Calibrating the scanner” on page 4 - 28 .
11.
Print the Self Test again, checking that the firmware release is that required.
Forced loading of firmware
Before proceeding to force loading of the firmware, contact Technical Support
Mail box : Banking.Printers@Olivetti.com
1
2