Olivetti PK-512, Service Manual, Page: 19 / 26

6. Finisher Field Service Ver. 1.0 Feb. 2007
14
PK-512/513
Adjustment / Setting
6.1.4 Punch Resist Loop Size (Body)
6.2 Punch option setting
Functions • Adjusts the punch loop size used for paper exited from the main unit.
Use
• To address problems such as misaligned punch holes, wrinkled paper, and jam at the
punch registration section.
Adjustment
instructions • Misaligned punched holes: Enter a positive value.
• Wrinkled paper: Enter a negative value.
Setting/
procedure
1. Call the Service Mode to the screen.
2. Touch [Finisher].
3. Touch [FS-FN adjustment].
4. Touch [Punch Resist Loop Size (Body)].
5. Set the correction value using the [+]/[-] keys.
6. Touch [OK] twice to return.
7. Touch [Exit] on the Service Mode screen.
8. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.
9. Make a copy again and check the deviation of punch hole position.
10. If the above adjustment does not resolve the problems, perform the punch hole devia-
tion correction.
P.15
Functions • Specifies punch settings depending on the optional punch kit attached to the finisher.
Use
• An individual punch setting needs to be made according to the type of the punch
option.
Adjustment
instructions
• The default setting is Non-installat.
1. Call the Service Mode to the screen.
2. Touch [Finisher].
3. Touch [Punch option setting].
4. Touch [PK-512] or [PK-513].
5. Touch [2-Holes/3-Holes] or [2-Holes/4-Holes] or [SWE4 holes].
6. Touch [decision].
7. Touch [END].
8. Touch [Exit] on the Service Mode screen.
9. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.
Service Manual Y108421-6