Olivetti PGL2645 Operation Manual Download Page 43 | Manualshive

Page: 43 / 286

Olivetti PGL2645 Operation Manual Download Page 43

2-9

Installing and Setting up the Machine > Power On/Off

Power On/Off

Power On

1

Turn the power switch on.

Power Off

1

Turn the power switch off.

It takes about 3 minutes for power off.

IMPORTANT

When turning off the power switch, do not turn on the power switch again
immediately. Wait more than 5 seconds, and then turn on the power switch.

CAUTION

If this machine will be left unused for an extended period (e.g. overnight), turn it off at the main power switch.
If the machine will not be used for an even longer period of time (e.g. vacation), remove the power plug from
the outlet as a safety precaution.

IMPORTANT

Remove paper from the cassettes and seal it in the paper storage bag to protect it from humidity.

«
...
41
42
43
44
45
...
»

Summary of Contents for PGL2645































































































































































































































































































Reviews:

No comments