Olivetti PGL2645, Operation Manual, Page: 200 / 286

9-10
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
NW User Property (Obtain Network User Property)
Set the required information to obtain the network user property from the LDAP server.
1
Display the screen.
1
[ Menu ] key > [▲] [  ] key > [ User/Job Account ] > [ OK ] key
2
[▲] [▼] key > [ User Login Set. ] > [ OK ] key
2
Configure the settings.
[▲] [

] key > [ NW User Property ] > [ OK ] key
The setting items are as follows.
NOTE
• This setting only appears when the "Login Type" of "User Login" is set to [ Netwk Authentic. ] and the "Server Type"
is set to [ NTLM ] or [ Kerberos ].
Enabling User Login Administration (page 9-3)
• Setting to obtain network user information is performed from the operation panel. The details of the information to be
obtained should be set with
Embedded Web Server RX
.
Embedded Web Server RX
User Guide
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login ]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name:
PG L2645
: 4500
PG L2650
: 5000

PG L2655
: 5500
Login Password:
PG L2645
: 4500
PG L2650
: 5000

PG L2655
: 5500
Item Descriptions
Off/On Set whether or not network user information is acquired.
Value : Off, On
Authenticat Type Set the authentication method.
Value : Simple, SASL