manualshive.com logo in svg

Olivetti PGL2645, Operation Manual, Page: 157 / 286

Share
Download
Olivetti PGL2645 Operation Manual Download Page 157

8-4

Setup and Registration (System Menu) > System Menu

Report

Print reports to check the machine settings and status. 

Default settings for printing the result reports can also be configured.

Report Print

[

Menu

] key > [

▲

] [

▼

] key > [

Report

] > [

OK

] key > [▲] [▼] key > [

Report Print

] > [

OK

] key

Adjust/Maint.

Adjust printing quality and conduct machine maintenance.

page 8-36

Restart

Restart the CPU without turning the power switch off. Use this to deal with 
any unstable operation by the machine. (Same as the computer restart.)

page 8-36

Op Functions

You can use the optional applications installed on this machine.

page 8-37

Software

Check the machine’s system and engine software versions.

page 8-37

Item

Description

Menu Map

Prints Menu Map to check the settings of the machine.

Config. List

Prints the list of settings of the system menu. The settings of this machine can be checked.

Status Page

Prints the status page, allowing you to check the information including current settings, 
available memory space, and optional equipment installed.

Item

Description

Reference Page

Menu Map

Config. List

Status Page

Summary of Contents for PGL2645































































































































































































































































































Reviews:

No comments