manualshive.com logo in svg

Olivetti PGL2645, Operation Manual, Page: 128 / 286

Share
Download
Olivetti PGL2645 Operation Manual Download Page 128

4-25

Printing from PC > Status Monitor

Status Monitor Notification Settings

The Status Monitor settings and event list details are displayed.

Select whether notification is performed when an error in the event list occurs.

1

Select Enable event notification.

If this setting is set to Off, then the Status Monitor will not start up even when printing is 
executed.

2

Select an event to use with the text to speech function in 

Available events.

3

Click Sound file / Text to Speech column. 

Click the browse (...) button to notify the event by sound file. 

When customizing the message texts to read on the screen aloud, enter the texts in the text 
box.

NOTE

The available file format is WAV.

Summary of Contents for PGL2645































































































































































































































































































Reviews:

No comments