Olivetti PGL2645, Operation Manual, Page: 234 / 286

10-17
Troubleshooting > Troubleshooting
E
F
I
Check cassette #. ― Open and then close the indicated
cassette. ―
Close left cover. Is there any cover which is open? Close the cover indicated on the
screen. ―
Close rear cover.
Close top cover.
*1 When Auto Error Clear is set to [ On ], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-32)
Message Checkpoints Corrective Actions
Reference
Page
Enclose the IPv6
address in brackets [ ]. ― The IPv6 address entered in the host
name is not enclosed in brackets [ ].
To enter the IPv6 address, enclose
the address in brackets [ ].
(e.g.,
[3ae3:9a0:cd05:b1d2:28a:1fc0:a1:1
0ae]:140) ―
Error occurred.
Turn the power switch
off and on. ― Press the power switch to turn off,
and then press it again to turn on.

If this message still remains, press
the power switch to turn off, and
contact your service representative.
―
Message Checkpoints Corrective Actions
Reference
Page
Failed to get the network
user information. — An error occurred when obtaining
user information after the
authentication. Log in again. ―
File was deleted.
Check the document
box. — The file or box selected does not exist.
Check that the box has not been
deleted, or that the file has not been
deleted or moved. ―
Message Checkpoints Corrective Actions
Reference
Page
Incorrect account ID. ― The Account ID does not match.
Check the registered Account ID. page 9-16
Incorrect account ID.
Press [OK].
*1
― The account ID was incorrect when
processing the job externally. The
job is canceled. Select [
OK ].
page 9-17
Message Checkpoints Corrective Actions
Reference
Page