Olivetti PGL2645 Operation Manual Download Page 155

Page: 155 / 286

8-2

Setup and Registration (System Menu) > System Menu

System Menu

Configure settings related to overall machine operation.
Select the [

Menu

] key to show the settings on the message display. Then, select from the settings displayed.

Refer to

Menu Settings

on the following page and configure as needed.

Operation Method (page 2-11)

NOTE

• In order to change settings that require administer privileges, you must log in with administrator privileges.



The factory default login user name and login password are set as shown below.

Login User Name:

PG L2645

: 4500

PG L2650

: 5000



PG L2655

: 5500

Login Password:

PG L2645

: 4500

PG L2650

: 5000



PG L2655

: 5500

• If function default settings have been changed, the [

Reset

] key can be selected in each function screen to

immediately change the settings.

Summary of Contents for PGL2645































































































































































































































































































Search results

Summary of Contents for PGL2645

Reviews:

Olivetti PGL2645, Operation Manual, Page: 155 / 286

Search results

Summary of Contents for PGL2645

Reviews: