Olivetti PG L2435, Operation Manual, Page: 190 / 222

Using the Operation Panel 7-83
Change Password (Administrator Password change)
You can use this to change the administrator password.
1
In step 3 in Password (Administrator Password input) above, press

or

while the Admin (Change) screen is displayed until
>Change
Password
appears.
IMPORTANT The administrator password is not displayed.
2
Press [OK] . A blinking cursor (
_
) appears.
3
Press

or

to increase or decrease, respectively, the value at the
blinking cursor. Enter the password to be changed. Use

and

to
move the cursor right and left. Enter a password consisting of
between 0 and 16 numbers.
4
Press [OK] . A confirmation screen appears. (E.g.: Where the
administrator password is changed to
010
)
5
Press [OK] . The new administrator password is confirmed.
6
Press [MENU] . The display returns to
Ready
.
>Change Password

>Change Password
_
OK?
010