manualshive.com logo in svg

Olivetti PG L2435, Operation Manual, Page: 182 / 222

Share
Download
Olivetti PG L2435 Operation Manual Download Page 182

Using the Operation Panel

7-75

4

Select 

Block

 or 

Unblock

 using 

 or 

.

5

Press 

[OK]

.

6

Press 

[MENU]

. The display returns to 

Ready

.

Option I/F (Network interface card setting)

This locks and protects the network interface card (NIC). The default 
setting is 

Unblock

.

1

Press 

 while 

>I/F Block

 

>

 is displayed. 

2

Press 

 or 

 repeatedly until 

>>Option I/F

 appears. 

3

Press 

[OK]

. A blinking question mark (

?

) appears.

4

Select 

Block

 or 

Unblock

 using 

 or 

.

5

Press 

[OK]

.

6

Press 

[MENU]

. The display returns to 

Ready

.

USB Storage (USB memory setting)

This blocks and protects the USB storage (USB memory). The default 
setting is 

Unblock

.

1

Press 

 while 

>I/F Block

 

>

 is displayed. 

2

Press 

 or 

 repeatedly until 

>>USB Storage

 appears. 

3

Press 

[OK]

. A blinking question mark (

?

) appears.

4

Select 

Block

 or 

Unblock

 using 

 or 

.

5

Press 

[OK]

.

6

Press 

[MENU]

. The display returns to 

Ready

.

WSD-PRINT (WSD-PRINT setting)

Select whether or not to use WSD Print. The default setting is 

On

.

1

After entering the administrator ID and password, press 

 or 

 

repeatedly until 

>WSD-PRINT

 appears.

2

Press 

[OK]

. A blinking question mark (

?

) appears.

3

Press 

 or 

 to select whether WSD-PRINT is enabled.

4

Press 

[OK]

.

5

Press 

[MENU]

. The display returns to 

Ready

.

Note  

Option I/F

 is displayed only when the optional network 

interface is installed on the printer.

>>Option I/F
? Unblock

>>USB Storage
? Unblock

>WSD-PRINT
? On

Summary of Contents for PG L2435































































































































































































































Reviews:

No comments