Olivetti PG L2435, Operation Manual, Page: 160 / 222

Using the Operation Panel 7-53
2
Press [OK] . A blinking question mark (
?
) appears.
3
Press

or

to select the desired LAN Interface. The available LAN
Interface are as follows:
Auto
10BASE-Half
10BASE-Full
100BASE-Half
100BASE-Full
1000BASE-T
4
Press [OK] .
5
Press [MENU] . The display returns to
Ready
.
MACAddressFilter (MAC address filtering setting)
This sets whether or not to enable MAC address filtering.
1
After entering the administrator ID and password, press

or

repeatedly until
>MACAddressFilter
appears.
2
Press [OK] . A blinking question mark (
?
) appears.
3
Press

or

to select whether MAC address filtering is enabled.
4
Press [OK] .
5
Press [MENU] . The display returns to
Ready
.
Communication (Select the network interface to use)
Select the interface to be used for network connection.
1
After entering the administrator ID and password, press

or

repeatedly until
>Communication
appears.
2
Press [OK] . A blinking question mark (
?
) appears.
3
Press

or

to select the desired NIC.
Standard NIC
(standard network interface of the printer)
Option NIC
(optional network interface kit)
4
Press [OK] .
5
Press [MENU] . The display returns to
Ready
.
>LAN Interface
? Auto
Note
The detailed settings for MAC address filtering are selected
using the optional network interface kit utility software.
>MACAddressFilter
? Off
>Communication
? Standard NIC