Olivetti PG L2435, Operation Manual, Page: 137 / 222

7-30 Using the Operation Panel
4
Press

or

to display the desired binding mode. The message
display toggles through the following:
Off
(default)
Short edge bind
Long edge bind
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Override A4/LT (Overriding difference between A4
and Letter)
When the
Override A4/LT
is turned
On
using the operation panel, the
printer ignores the difference between A4 and Letter paper sizes.
Printing is performed without an error message even if the actual paper
size in the current cassette differs from the paper size formatting the job.
By default, this feature is
Off
.
1
Press

while
Print Settings >
is displayed.
2
Press

or

repeatedly until
>Override A4/LT
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
On
or
Off
using

or

.
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Emulation (Setting the emulation)
You can change the emulation mode for the current interface. Use the
procedure below to select the mode.
1
Press

while
Print Settings >
is displayed.
2
Press

or

repeatedly until
>Emulation >
appears on the
message display. One of the emulation modes appears, indicating
the emulation currently in use.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Press

or

repeatedly until the desired emulation mode is
displayed.
PCL 6
KPDL
KPDL (AUTO
)
Line Printer
IBM Proprinter
EPSON LQ-850
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
>Override A4/LT
? Off
>Emulation
? PCL 6
Note
The default setting for North America is
KPDL (AUTO)
emulation. The default setting for all other regions is
PCL 6
emulation.