manualshive.com logo in svg

Olivetti PG L2435, Operation Manual, Page: 179 / 222

Share
Download
Olivetti PG L2435 Operation Manual Download Page 179

7-72

Using the Operation Panel

Off/On (Setting toner addition notifications)

Select whether Toner Alert Level is enabled.

1

After entering the administrator ID and password, press 

 or 

repeatedly until 

>>Off/On

 appears.

2

Press 

[OK]

. A blinking question mark (

?

) appears.

3

Select 

On

 or 

Off

 using 

 or 

.

4

Press 

[OK]

.

5

Press 

[MENU]

. The display returns to 

Ready

.

TonerAlert Level (Setting for the alert level for toner addition)

This sets the level at which toner addition alerts will be displayed.

1

After entering the administrator ID and password, press 

 or 

repeatedly until 

>>TonerAlert Level

 appears.

2

Press

 [OK]

. A blinking cursor (

_

) appears.

3

Press 

 or 

 to increase or decrease the value at the blinking cursor

and set the level at which an alert will be displayed. The setting is 
possible between 

005

 and 

100%

. Use 

 and 

 to move the cursor 

right and left.

4

Press 

[OK]

.

5

Press 

[MENU]

. The display returns to 

Ready

.

>>Off/On
? Off

>>TonerAlert Level

   005 %

Summary of Contents for PG L2435































































































































































































































Reviews:

No comments