manualshive.com logo in svg

Olivetti PG L2435, Operation Manual, Page: 156 / 222

Share
Download
Olivetti PG L2435 Operation Manual Download Page 156

Using the Operation Panel

7-49

HTTP (HTTP setting)

Select whether or not to communicate using HTTP.

1

Press 

 while 

>Protocol Detail >

 is displayed.

2

Press 

 or 

 repeatedly until 

>>HTTP

 appears.

3

Press 

[OK]

. A blinking question mark (

?

) appears.

4

Select 

On

 or 

Off

 using 

 or 

.

5

Press 

[OK]

.

6

Press 

[MENU]

. The display returns to 

Ready

.

Restart Network (Restarting the network card)

After all network related settings have been done, restart the network 
card of the device. This is mandatory to make the settings effective.

1

Press 

 while 

Network >

 is displayed.

2

Press 

 or 

 repeatedly until 

>Restart Network

 appears.

3

Press 

[OK]

. A question mark (

?

) appears.

4

Press 

[OK]

 again. The message 

Restarting… Please wait.

appears and the network is restarted.

>>HTTP
? On

>Restart Network ?

Summary of Contents for PG L2435































































































































































































































Reviews:

No comments