Olivetti PG L2435, Operation Manual, Page: 131 / 222

7-24 Using the Operation Panel
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Type Adjust (Creating custom paper type)
The following describes the procedure used to set a user-defined paper
type for the printer. Eight custom user settings may be registered. After
having been set, any of these may be called up when setting the paper
type for a paper source.
The paper weight and duplex path can be set (refer to Paper Weight
(Setting the paper weight) on page 7-24 , and Duplex Path (Setting
the duplex path) on page 7-25 ) after selecting the paper type to be
customized as follows. For how to reset the customized settings, refer to
Reset Type Adjust (Resetting the custom paper type) on page 7-25 .
1
Press

while
Paper Settings >
is displayed.
2
Press

or

repeatedly until
>Type Adjust >
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Press

or

to display the desired paper type. The display changes
as shown below.
PLAIN
TRANSPARENCY
PREPRINTED
LABELS
BOND
RECYCLED
VELLUM
ROUGH
LETTERHEAD
COLOR
PREPUNCHED
ENVELOPE
CARDSTOCK
THICK
HIGH QUALITY
CUSTOM 1
(to
8
)
5
Press [OK] .
6
Press

and proceed to the next step Paper Weight (Setting the
paper weight) .
Paper Weight (Setting the paper weight)
You can set the paper thickness for your custom paper type to be
customized.The default setting is
Normal 2
.
1
Display the custom paper type (refer to Type Adjust (Creating
custom paper type) on page 7-24 ) and press

.
2
Press

or

repeatedly until
>>Paper Weight
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
>Type Adjust >
? PLAIN
>>Paper Weight
? Normal 2